Centroid Community CNC Support Forum

Hello,
For some reason my lathe is posting 2 G50 Parameter 116 is set to 1750.
I have been editing the extra one out.
Control #8121

I would rough the key with an endmill first. It will make an u shape but this will take most of the stock out and make it easier oh the machine.

the Y axis takes more power to move.

And it must not be the gibs casing to much drag. the old graf is with gibs real tight and the yellow is wit them real lose.

Thank you for the help, today is a new day! I have don more research on geb adjustment. I am working in them one at a time trying not to get over my head. Currently I am working on the Y axis. not to long ago I replaced the SEM servo with a Centroid I see that it takes more power to move the table. ...

I was reading on the post "Drag Plot Explanation" looking to clear the screen see attached photo. Ok maybe a bad move on my part but I backed into checking the Gib adjustment on my 1995 Revolution bed mill with new control. So now I hope to clear the Drag plot history. I did read on the po...

We Have a new M400 with Wi-Fi the only time we would use it would to have Centroid Tec do a remote.
Should I leave it off and not install any Windows updates?

Yes I am using Intercon to program the part thank you.

Hello All! On the T15 lathe control cereal #8121 :?: I was wondering is there a way to make one program that can cut the front of a part, then go to a tool change position, stop the spindle so I can turn the part around then press cycle start and then cut the back side? Thank you for your help!!! Ta...

Thank you Very much!!!!

Control 8121 CNC lathe. T15

I was wondering how to Exit the Edit Gcode window on the lathe?

Thank you,