Centroid Community CNC Support Forum

The Pro License is required for Wireless MPG use. The Pro License also provides many other features, such as unlimited file size, etc.

Yes, based on the report it is running the Standard PLC program so no changes would be needed. You can update to CNC12 4.14 with just a free software update. Upgrading to the latest CNC12 4.22 would require a Legacy Software Upgrade ($299). This would get you to the Mill Pro level which would also a...

Preston, The lines scrolling on the LED show the board in a normal state. Can you ping NIC at 10.168.41.1? Then ping the AcornSix at 10.168.41.2? Do you get results from both? Unless settings were changed there would be no issues with the Firewall, but you can go into the Windows Defender Firewall s...

Based on your photos, everything I can see is connected correctly. I don't see a photo of your power supply connections, but I do see the NUC power supply is plugged in. The display on the screen means the monitor is powered but has no input signal. Does the Power LED on the NUC come on when you tur...

The 4.20+ Offline Intercon Dongle does not use Sentinel Encryption so that software would not find anything. There is no software on the key itself, it is not read as a hard drive. It is a decryption key. Please reply to my email with your TeamViewer info when you are ready and I would be happy to t...

Centroid took a look at the code and verified it would run. But there was no current report and as such could not troubleshoot this further. Looking at your report you sent, you have a spindle encoder setup in the software. Is a spindle encoder physically connected? Is it 2000 line / 8000 counts?

Please send it to diysales@centroidcnc.com Please let us know what you are looking to purchase and the address of where it will go.

Hello Yelleke,

Anything International will need shipping calculated, we can check it ahead of time if you send us an email with the address. We will charge the difference left over between the $10 and what the total cost would be.

To confirm, we have never tested it in those configurations. The CPU hardware is within specs, but we don't know what kind of latency will be added and what affect that could have on operational results.

Over the last few weeks we have set up and determined compatibility along with settings and parameters for using the Oak with the new Automation Direct SureServo2 drives. They run great in Position mode and also have a excellent auto-tune feature built into the drive. Attached is the drive configura...