Centroid Community CNC Support Forum

I wanted to update my CNC mill to CNC12 vs. 5 but Windows 10 needed to be updated. I don't have internet in my shop. The PC would have needed to be taken to the house in order to connect to the internet. I do have 5G cell service on my cell phone in my shop so I used a USB cable between my cell phon...

Seems to me this forum did figure it out for you. The 10:1 gearboxes would work with servos but they aren't going to give you the speeds you want with steppers.

Do you want to use both spindles in the same job? If not you can configure your machine with two different configurations. I asked this question regarding my universal milling machine. I was told to have two totally different machine configurations of the Acorn. I never set it up as I have a horizon...

Bull there is no problem! You didn't tell us what you are making....don't leave us hanging. Fess up inquiring minds want to know!

How are you dealing with the conflict between your encoder on the servo and the linear scales? What is the resolution of your encoders? Or is this a non issue?

Stop making this look so easy! Us mere mortals only can dream of doing this stuff! Great job.

Keith, I noticed on the stock mill picture there are feed rate buttons for percentages. Is that stock because mine doesn't have them and I think I am running the latest version?

OK. Got it. Thanks.

The way I did it was to put the plate from the spindle top on my mill table and align two for the opposite holes along the X axis using my 3D taster. Then I put the tip of the 3D taster in one hole on the side closest to the center boss and zeroed my X axis. Then I went to the opposite hole and meas...

How would you accurately find the radius of the BHC? Finding the center off the boss no problem.