Search found 428 matches

by Centroid_Liviu
Thu Jan 28, 2021 11:34 am
Forum: Centroid Acorn CNC Controller
Topic: communication pc to pc with ethernet cable ,for transfering data
Replies: 4
Views: 2021

Re: communication pc to pc with ethernet cable ,for transfering data

I want to know how to proceed with the 2 win 10 pc for communicating together. PC's can have two ethernet cards but I've not tried it with Acorn to see if it interferes. It may cause issues! Dave C. You can have multiple NICs in the same PC with no issues. You then just have to be aware of which on...
by Centroid_Liviu
Thu Jan 28, 2021 11:32 am
Forum: Centroid Acorn CNC Controller
Topic: Acorn V4.5 license not installing (RESOLVED)
Replies: 12
Views: 4413

Re: Acorn V4.5 license not installing

Do you have internet at the machine? Please give us a call at 814-353-9290 and we can schedule a Teamviewer session to see if we can troubleshoot this directly.

Please upgrade to CNC12 4.60 in the meantime. free support for v4.5 has ended.
by Centroid_Liviu
Wed Jan 27, 2021 9:25 am
Forum: Centroid Acorn CNC Controller
Topic: Acorn V4.5 license not installing (RESOLVED)
Replies: 12
Views: 4413

Re: Acorn V4.5 license not installing

Try deleting the license.dat in the CNCT directory. Then copy the License back down to the PC from the email and loading it again. Just in case anything got corrupted.
by Centroid_Liviu
Mon Dec 28, 2020 5:31 pm
Forum: Centroid Acorn CNC Controller
Topic: v4.5 acorn cnc mill pro license not installing (Resolved)
Replies: 14
Views: 5350

Re: v4.5 acorn cnc mill pro license not installing

The serial number and the license match (the hardware and the License were sent out at the same time). We are looking into it further to see what the issue could be.
by Centroid_Liviu
Tue Sep 15, 2020 12:12 pm
Forum: Centroid Acorn CNC Controller
Topic: Acorn License (Resolved)
Replies: 5
Views: 2334

Re: Acorn License

Licenses were not purchased through us, but via a re-seller. This was resolved when the re-seller eventually purchased the licenses from us.
by Centroid_Liviu
Tue Aug 11, 2020 9:12 am
Forum: Centroid Acorn CNC Controller
Topic: VCP Disapears <resolved, don't use tablet mode>
Replies: 4
Views: 2282

Re: VCP Disapears

CNC12 has not been tested in Tablet mode. It sounds very much like a Windows, as in tablet mode it tries to only show one "app" at a time and is getting confused with the VCP. There might be workarounds but running in tablet mode is not currently something supported.
by Centroid_Liviu
Tue May 12, 2020 8:44 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: SSD
Replies: 2
Views: 1759

Re: SSD

The Centroid Software only takes up around 100mb, but Windows itself takes up about 24GB and is growing with every update. SSDs also need some free space to work at optimal performance. So 128GB would probably be the minimum, but as stated above, the cost is so low for 256GBs it doesn't make sense f...
by Centroid_Liviu
Sun Apr 12, 2020 7:42 pm
Forum: Centroid Acorn CNC Controller
Topic: Question on Shipping from Centroid
Replies: 3
Views: 2107

Re: Question on Shipping from Centroid

Hello Steve, Please send me an email at diysales@centroidcnc.com . We are operating with a limited staff and we apologize if we made a mistake on an order, but if that is the case we will make it right. We are working mostly remotely, but 814-353-9290 ext 117 should be also still be working (that is...
by Centroid_Liviu
Wed Mar 04, 2020 9:47 am
Forum: Centroid Acorn CNC Controller
Topic: Acorn Ethernet Communications Error 63 - RESOLVED
Replies: 17
Views: 7448

Re: Acorn Ethernet Communications Error 63

Connect one of the Acorns directly to the PC via Ethernet, to eliminate the Switch from the equation and check the IP address as Marty suggest. I would also disable the Anti-Virus to make sure an update to it didn't flag the Centroid Software of the network connection to the Acorn as a problem with ...
by Centroid_Liviu
Mon Dec 30, 2019 4:53 pm
Forum: Centroid Acorn CNC Controller
Topic: PC
Replies: 7
Views: 3797

Re: PC

I'm trying a NUC8i3BEH that I bought for a customer for another purpose. He doesn't need it until after New Years, so I'm trying in on one of my Acorn test benches. I've placed the NUC in various positions near various components and have had no problem with electrical noise. Granted, an open test ...