Search found 7332 matches
- Thu Feb 08, 2024 2:53 pm
- Forum: Acorn CNC Plasma
- Topic: Torchmate accumove 2 conversion
- Replies: 50
- Views: 2172
Re: Torchmate accumove 2 conversion
looks like an ok starter frame to rework the system, lots of details in the photos to fix and get right to have good performance though. I would build all new CNC control box and use Closed Loop Leadshine Stepper motors or better yet Clearpath Stepper Killers and you could run the entire control box...
- Wed Feb 07, 2024 10:37 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Fanuc AC Servo Spindle Motor with GS4 drive for CHNC2 Retrofit.
- Replies: 2
- Views: 222
Re: Fanuc AC Servo Spindle Motor with GS4 drive for CHNC2 Retrofit.
yeah many of those old fanuc spindle motors were not 'normal' motors as you say.
- Wed Feb 07, 2024 10:35 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Problem with DXF file
- Replies: 4
- Views: 406
Re: Problem with DXF file
if customer wants to use a dxf file i suggest using a CAD/CAM system to create the G code.
and use intercon for the conversational style programming, that is it strength.
and use intercon for the conversational style programming, that is it strength.
- Wed Feb 07, 2024 10:34 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Allin1DC ATC issues
- Replies: 7
- Views: 446
Re: Allin1DC ATC issues
post a fresh report.zip so we can see your setup, otherwise we would be needing a crystal ball
- Wed Feb 07, 2024 10:28 pm
- Forum: Acorn CNC Plasma
- Topic: dual tool on a 4 axis plasma table, torch/drill motor on z
- Replies: 4
- Views: 439
- Wed Feb 07, 2024 9:34 pm
- Forum: Centroid Acorn CNC Controller
- Topic: How do I change the Tool Number in CNC12 after i put a tool in the Spindle manually?
- Replies: 0
- Views: 208
How do I change the Tool Number in CNC12 after i put a tool in the Spindle manually?
How do I change the Tool Number in CNC12 after i put a tool in the Spindle manually? i get asked for this a lot so, we created a easy peasy VCP button you can install it on your machine now if you are running CNC12 v5.08 - the VCP button folder "set_tool_numer.zip" file attached. copy to c...
- Wed Feb 07, 2024 9:34 pm
- Forum: Acorn CNC Tech Tips Knowledge Base, Look Here! before posting
- Topic: How do I change the Tool Number in CNC12 after i put a tool in the Spindle manually?
- Replies: 3
- Views: 327
How do I change the Tool Number in CNC12 after i put a tool in the Spindle manually?
How do I change the Tool Number in CNC12 after i put a tool in the Spindle manually? i get asked for this a lot so, we created a easy peasy VCP button you can install it on your machine now if you are running CNC12 v5.08 - the VCP button folder "set_tool_numer.zip" file attached. copy to c...
- Wed Feb 07, 2024 6:51 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: OPCON and USB-BOB
- Replies: 79
- Views: 4085
Re: OPCON 15374
That [latching pushbuttons with hard-wired lights to show when they are latched on] would be a poor second to having individually addressable outputs for the lights. If your remote panel it going to have a "Feed Hold" button, wouldn't you like it to work like the one on the VCP? That mean...
- Wed Feb 07, 2024 6:24 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Wizard not affecting Relay outputs... <resolved, forced off>
- Replies: 4
- Views: 277
Re: Wizard not affecting Relay outputs...
thanks for reporting back.robert.trescott wrote: ↑Tue Feb 06, 2024 4:10 pm Got it! It was indeed the PLC Diagnostics forced in the output off state. It had to be something obvious! Cheers and Thanks
- Wed Feb 07, 2024 5:57 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: OPCON and USB-BOB
- Replies: 79
- Views: 4085
Re: OPCON 15374
You could also easily just use a lighted, DPDT pushbutton and run the light/led in the pushbutton through the second set of contacts to either turn the light on or off to acknowledge the button press. i like that idea! seems to be a fair amount of them available? quick search on automation direct a...