Centroid Community CNC Support Forum

Yes exactly where I read that. Thanks for posting link.

I am new to encoding terminology. I found the below passage helpful in understanding CPR and PPR. CPR most commonly stands for Counts per Revolution, and refers to the number of quadrature decoded states that exist between the two outputs A and B. With both outputs A and B switching between high and...

Have you measured the voltage on each leg of your RPC? Is it balanced? If not and with only 2-3hp need probably I would not risk using the wild leg on the VFD input as there is no real benefit. In fact it will cost you more per kw as the ideler is running during usage of the RPC.

So post up the info for others.

Request the USB key.

Why not create a second tool adding the additional test diameter to the tool definition?

Check the amperage setting for the drive inputs (the pins have a range). Once you verify those are right make sure to run the tuning.

More Knowledgeable people than I will reply tomorrow

OK I have a ER32 floating tapping head now and the DC regen res installed for braking my VFD.

Is there a formula or table for figuring out good speeds for taps? 1/4-20, 1/2-13. 4-40, 8-32, 10 - those are the sizes I use the most.

Any advice on using the floating tapping heads?

Centroid Rotary Table - RT-150

Would it help to see the Hitachi WJ200 2.2kw connections to the AllInOneDC?