Related reading:
https://www.centroidcnc.com/centroid_di ... amming.pdf
https://www.centroidcnc.com/centroid_di ... _guide.pdf
Uwe
Search found 2067 matches
- Mon May 13, 2024 1:40 pm
- Forum: Centroid Acorn CNC Controller
- Topic: I/O mapping for M94/95
- Replies: 4
- Views: 34
- Mon May 13, 2024 1:32 pm
- Forum: Centroid Acorn CNC Controller
- Topic: I/O mapping for M94/95
- Replies: 4
- Views: 34
Re: I/O mapping for M94/95
current M94 assignment of you setup is in the PLC, Here an example ;------------------------------------------------------------------------------ ; M functions - The System Variables in this section inform the ; PLC that an M function has been requested. ;-------------------------------------------...
- Mon May 13, 2024 1:03 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Dxf
- Replies: 65
- Views: 38746
Re: Dxf
I have no problems with dxf import, but this one is also not a closed contour.
To mill pockets, dxf must be closed around the pocket.
I use AutoCAD LT or Inkscape with no problems.
Uwe
To mill pockets, dxf must be closed around the pocket.
I use AutoCAD LT or Inkscape with no problems.
Uwe
- Mon May 13, 2024 11:41 am
- Forum: Centroid Acorn CNC Controller
- Topic: Wizard PLC function to change spindle direction and enable?
- Replies: 9
- Views: 160
Re: Wizard PLC function to change spindle direction and enable?
Outputs on the CNC are not switched by an relay, they are switched with the software and can switch an relay.
You like to make simple things complicate...
Uwe
You like to make simple things complicate...
Uwe
- Mon May 13, 2024 11:37 am
- Forum: Centroid Acorn CNC Controller
- Topic: I/O mapping for M94/95
- Replies: 4
- Views: 34
Re: I/O mapping for M94/95
M94/1 Output 1
M94/2 Output 2
....
Uwe
M94/2 Output 2
....
Uwe
- Mon May 13, 2024 11:18 am
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Multi Start Threads
- Replies: 1
- Views: 44
Re: Multi Start Threads
1 Yes
2 No, also a threading tool is ground for a 1-4 degree helix angle, not for 30-60...
Herea subprogram I use to mill knurls with C-axis.
https://centroidcncforum.com/viewtopic. ... ond#p77557
Uwe
2 No, also a threading tool is ground for a 1-4 degree helix angle, not for 30-60...
Herea subprogram I use to mill knurls with C-axis.
https://centroidcncforum.com/viewtopic. ... ond#p77557
Uwe
- Sun May 12, 2024 4:18 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Feature Request - SSV
- Replies: 4
- Views: 1448
Re: Feature Request - SSV
This also is very good for turning long thin parts.
Uwe
Uwe
- Sat May 11, 2024 8:27 am
- Forum: Centroid Acorn CNC Controller
- Topic: Wizard PLC function to change spindle direction and enable?
- Replies: 9
- Views: 160
Re: Wizard PLC function to change spindle direction and enable?
No Risk No Fun
But I would always choose a way if possible without editing PLC, makes updates faster.
VFD Direction and VFD Enable is perfect for a servo driven spindle on the relayboard since you can easy wire it to NC or NO.
Uwe
But I would always choose a way if possible without editing PLC, makes updates faster.
VFD Direction and VFD Enable is perfect for a servo driven spindle on the relayboard since you can easy wire it to NC or NO.
Uwe
- Sat May 11, 2024 12:46 am
- Forum: Centroid Acorn CNC Controller
- Topic: Z Axis lag - Loosing position
- Replies: 4
- Views: 88
Re: Z Axis lag - Loosing position
Connect the CL85T to 5V DB25, it runs more reliable this way.
Uwe
Uwe
- Fri May 10, 2024 2:29 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Tool Hight measurement Macro
- Replies: 3
- Views: 104
Re: Tool Hight measurement Macro
Easy way is Probe APP, otherwise the needed macro is in your keyboard
Uwe
Uwe