Search found 524 matches
- Mon May 27, 2024 4:32 pm
- Forum: Acorn CNC Plasma
- Topic: Torch calibration program
- Replies: 1
- Views: 81
Re: Torch calibration program
Torch Calibration is in the "Utils" button on the bottom of the VCP.
- Sun May 26, 2024 9:34 am
- Forum: Acorn CNC Plasma
- Topic: Acorn Plasma THC Controller as router
- Replies: 2
- Views: 88
Re: Acorn Plasma THC Controller as router
Yes
When installing CNC12 you will see an option for a Router/ Plasma combination.
The installer will download both Router and Plasma versions with a Desktop swap button for jumping from the plasma to router software.
When installing CNC12 you will see an option for a Router/ Plasma combination.
The installer will download both Router and Plasma versions with a Desktop swap button for jumping from the plasma to router software.
- Wed May 22, 2024 2:46 pm
- Forum: Acorn CNC Plasma
- Topic: SHEET CAM
- Replies: 15
- Views: 3978
Re: SHEET CAM
There is a video link in my Post found here https://centroidcncforum.com/viewtopic. ... eed#p67483
- Thu May 16, 2024 3:24 pm
- Forum: Acorn CNC Plasma
- Topic: Turns/inch motor shaft
- Replies: 5
- Views: 348
Re: Turns/inch motor shaft
Thanks for pointing this out Guys, Pg.3 and 9 of the Plasma Manual has been updated.
You can find the Updated manual here
https://www.centroidcnc.com/centroid_di ... manual.pdf
You can find the Updated manual here
https://www.centroidcnc.com/centroid_di ... manual.pdf
- Tue May 07, 2024 5:37 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Machine parameter for Linear encoder input
- Replies: 11
- Views: 657
Re: Machine parameter for Linear encoder input
The AIKRON Model:AKM1 Has been Tested at Centroid. The Signal Type Needs to be the 5v RS422 https://www.aikrondro.com/product/aikron-akm-series-linear-encoders/ I've attached a snip of the DB9 connector of the Aikron and the Changes needed to match the Centroid DB9 Encoder Port. Aikron Scale Wiring....
- Tue May 07, 2024 4:47 pm
- Forum: Acorn CNC Plasma
- Topic: SheetCam Hypertherm 45XP .tool file (inch)
- Replies: 1
- Views: 184
Re: SheetCam Hypertherm 45XP .tool file (inch)
Acorn Plasma Takes care of any ''Tool'' settings. Acorn Plasma comes with all default Profiles from Hypertherm.
Acorn Plasma does not use any of the tool information from Sheetcam .
Sheetcam Has a forum if you really want the Sheetcam toolset.
Acorn Plasma does not use any of the tool information from Sheetcam .
Sheetcam Has a forum if you really want the Sheetcam toolset.
- Fri May 03, 2024 11:21 am
- Forum: Acorn CNC Plasma
- Topic: Please help! I fried my THC!!!
- Replies: 11
- Views: 1523
Re: Please help! I fried my THC!!!
Thats odd. Can you post a fresh report Please. The Report will have all you settings and macros. So I can then really see what the control is doing and why. Can you also Post the G-code used. I'm thinking the M61 macro is at fault of there is something going on in the G-code. Was the G-code job from...
- Wed May 01, 2024 5:50 pm
- Forum: Acorn CNC Plasma
- Topic: Please help! I fried my THC!!!
- Replies: 11
- Views: 1523
Re: Please help! I fried my THC!!!
Good choice on switching to the Everlast Torch Touch with Everlast and Primeweld is not officially supported by Centroid. I haven't seen another Everlast Using the TX torch touch yet. What does the Tin Wire connect too? I have seen the Primeweld Hooked up to the TX boards Torch touch and it seems to...
- Wed May 01, 2024 4:09 pm
- Forum: Acorn CNC Plasma
- Topic: Speed around corners
- Replies: 6
- Views: 818
Re: Speed around corners
Lowering the Parameter P223 should help with Arcs. I wouldn't take P223 below 100. Setting the Drives to 6400 and the wizard to match should also fix the speed up issue. The Laser offset issue is puzzling. I've even loaded your report on a fresh 5.08 build and Laser set X/Y functioned as expected. I...
- Fri Apr 26, 2024 12:39 pm
- Forum: Acorn CNC Plasma
- Topic: Torchmate accumove 2 conversion
- Replies: 52
- Views: 8105
Re: Torchmate accumove 2 conversion
Did you try the different duplex settings? I've seen some PC's that needed the Duplex setting changed or manually set.
100mps or 100 Half duplex or 100 full duplex.
100mps or 100 Half duplex or 100 full duplex.