Search found 3 matches

by Serge10667
Tue Apr 09, 2019 5:11 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Intercom for lathe version v4.14
Replies: 1
Views: 1095

Intercom for lathe version v4.14

How do I activate the virtual control panel with the lathe intercom program version V4.14. ?
Setting the parameter 219 to 1, do nothing!
by Serge10667
Wed Jan 24, 2018 1:48 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: cnc12 lathe or mil not starting
Replies: 2
Views: 1130

Re: cnc12 lathe or mil not starting

Hi, The problem was no communication with the Ethernet the green light was not blinking. I powered down the 24V supply and restarted it, the cnc121 is communicating correctly with the PC with the green light blinking all the time. Both programs CNC 121 Lathe and Mill are working correctly. Hope this...
by Serge10667
Tue Jan 23, 2018 8:27 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: cnc12 lathe or mil not starting
Replies: 2
Views: 1130

cnc12 lathe or mil not starting

I installed new CNC12 lathe worked fine with the test set up
I installed CNC12 mill on the same PC, not starting and CNC 12 lathe not starting also, the led communication and blue hard beet are ok.
How do I fix this problem?
Can we install both lathe and mill on the same PC