Centroid Community CNC Support Forum

I am also having issues with auto pairing.

Subscribed

both NO and NC switches are supported with axis pairing and auto squaring. several users have had issues with NO switches, this is why we always recommend NC switches. see hookup examples in the axis pairing guide. here.. https://www.centroidcnc.com/centroid_diy/downloads/acorn_documentation/paired...

both NO and NC switches are supported with axis pairing and auto squaring. several users have had issues with NO switches, this is why we always recommend NC switches. see hookup examples in the axis pairing guide. here.. https://www.centroidcnc.com/centroid_diy/downloads/acorn_documentation/paired...

Should not be the case... Can't see what you see. Always post a fresh report. Use your diagnostic screen (Alt and the i key) to watch the inputs (far upper left hand corner, legend is in the middle of the diagnostic screen under the last virtual LED line. Video clip would be helpful. Do you have an...

Hey Larry- the keyboard shortcut to display machine coord is Alt + D. You can hit it at any time, including during program run to toggle between machine / work coordinates Marty has good advice with the graph editor, that can be very useful as a double check of travel limits. Though I am pretty sure...

Oh there is one question that is still looming, and that is why does my homing routine not work properly with switches set to NO? CNC12 doesn't back off the switch ones triggered like it should. Just stays there on top of it.

Thank you cncsnw! That is what I was looking for! TY :) If it happens again (hopefully not) I'll know what to do. Thanks so much! Also I am going to get the prox sensors if my new limit switches end up still giving me issues- which I kind of have a feeling they will haha. I just got the "Temco&...

Alright so Keith answered a few of my questions in another thread, but I would like to put in a feature request, if it isn't already possible:

If a job is stopped for any cancellation due to limit switches / fault / error, is it possible to show what line of GCODE the program ended at?

Hi Keith! I just saw this, thanks so much for the heads up. Sorry, I just started another thread with some related stuff. The jumpering trick is going to work super well for now. I'll also get those proximity switches on order. The revolution steps are what the previous owner had set up in Mach3, an...

Alright I am back to NC switches, but still getting 325 job cancellations and not sure which axis/input is causing the most trouble because the info isn't shown. I found the log utility, but the 325 cancellation doesn't seem to be treated like an error so it doesn't show up. It's also becoming a bit...