Search found 17 matches
- Fri Feb 12, 2021 8:24 pm
- Forum: Centroid Acorn CNC Controller
- Topic: MDI problem <feed rate override at 1%>
- Replies: 4
- Views: 2107
Re: MDI problem
I resolved the MDI problem the feed rate over ride got turned down to 1% when I updated some how ,and I do know the deference between a G98 And a G99 on a lathe and on a mill also. The connection problem now that's a different kettle of fish I will give that Ethernet switch a try and see what that d...
- Fri Feb 12, 2021 4:59 pm
- Forum: Centroid Acorn CNC Controller
- Topic: MDI problem <feed rate override at 1%>
- Replies: 4
- Views: 2107
MDI problem <feed rate override at 1%>
I am having a problem with the MDi screen if i command a (G1 f1.5 z- 2.0 ) from part zero, the DRO updates to -2.0 but nothing moves am i doing something wrong here ? It will how ever move with a G0 move but no feed moves ? this is on a lathe i am using the second generation board with the currant s...
- Sat Jan 20, 2018 4:39 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Updated DMM DYN2 and DYN4 to Acorn Hookup schematics.
- Replies: 21
- Views: 9124
Re: Updated DMM DYN2 and DYN4 to Acorn Hookup schematics.
Thank's, Russ that will help me get this thing going.
- Sat Jan 20, 2018 4:08 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Updated DMM DYN2 and DYN4 to Acorn Hookup schematics.
- Replies: 21
- Views: 9124
Re: Updated DMM DYN2 and DYN4 to Acorn Hookup schematics.
The machine is a lathe ,sorry about that, on the schematic it says to hook wire to ZRI on DYN2 drive to input 2 on Acorn ,I was trying to find out why? And what it was for ? Because in the wizard if you load the proper schematic it comes up with it, as a limit switch input 2 ,I do not wish to use it...
- Fri Jan 19, 2018 3:39 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Updated DMM DYN2 and DYN4 to Acorn Hookup schematics.
- Replies: 21
- Views: 9124
Re: Updated DMM DYN2 and DYN4 to Acorn Hookup schematics.
I have a question on input 2 with a DYN2 drive, wiring says ZRI or absolute zero position index ,what do you set it to in the Wizard?
When i selected Dmm Tech it set it to 2nd limit.
When i selected Dmm Tech it set it to 2nd limit.
- Wed Jan 17, 2018 1:15 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Updated DMM DYN2 and DYN4 to Acorn Hookup schematics.
- Replies: 21
- Views: 9124
Re: Updated DMM DYN2 and DYN4 to Acorn Hookup schematics.
Is there going to be a problem with the mixture of the two drives ,i have DYN2 and DYN4 drives ?
I also have a question about the limit inputs if using proximity switch, as you have daisy chained the input for the DYN 2 drive.
I also have a question about the limit inputs if using proximity switch, as you have daisy chained the input for the DYN 2 drive.
- Tue Jan 09, 2018 11:36 am
- Forum: Centroid Acorn CNC Controller
- Topic: voltage on out puts for spindle fwd rev
- Replies: 4
- Views: 2406
Re: voltage on out puts for spindle fwd rev
Thank you for your response's , the pulling negative makes sense and i can supply the 5 volt to the input pin on my control .
- Tue Jan 09, 2018 12:10 am
- Forum: Centroid Acorn CNC Controller
- Topic: voltage on out puts for spindle fwd rev
- Replies: 4
- Views: 2406
voltage on out puts for spindle fwd rev
Can someone tell me what the outputs voltage are ? say for fwd or rev , and if it is 24 volt ,can i step it down to 5 volt with a buck converter for a 5 volt signal.
- Mon Jan 08, 2018 9:13 pm
- Forum: Centroid Acorn CNC Controller
- Topic: DMM AC servo spindle and C axis. Parts ordered!
- Replies: 37
- Views: 12805
Re: DMM AC servo spindle and C axis. Parts ordered!
Any way that drawing i posted is proven and does work , i do not see any reason why it would not work for the Acorn ,if so somebody chime in . The only thing else i can tell you is about tuning ,when you get there let me know and i will lend a hand . I would worry about C drive later and i would not...
- Mon Jan 08, 2018 9:03 pm
- Forum: Centroid Acorn CNC Controller
- Topic: DMM AC servo spindle and C axis. Parts ordered!
- Replies: 37
- Views: 12805
Re: DMM AC servo spindle and C axis. Parts ordered!
I am confused who is who!