Centroid Community CNC Support Forum

OK Marty success I loaded your report install my pro License And change a few configurations and it work like described. So where do you think the problem lies in my download of v4.5? Thanks again for all you patients. Now you can. Concentrate on your hot rod 😀. I started a project on my s10 a year ...

Thanks Marty I will try it out as soon is my shop cool down. No I have not been using m6 T0202 etc.
John

The sensor in the pix is for the x axis.

John

Okay Marty
Some pictures 1.turret 2.inputs 3.outputs

John

Okay Marty second attempt to post. I install acorn on a different computer using all the necessary attachments v4.5 turret files still getting the same results no turret rotation on a command for tool change either on MDI or in a program. The turret index works ( button on VCP ) also the M18 in MDI....

Hi Marty thanks for the reply. I re-install everything again I will have to check all par again. I use Proximity sensors for my limit switches also so that’s why I am using two inputs . I never tried them in any other configuration. I have both type of sensors n.c. And n.o.npn I can try to reconfigu...

My wiring is as followers: input is #2 from my proximity sensor which is stopping the turret on a M18 command. The output is #2 which controls my D.P.D.T relay 24vdc for forward and 12vdc holding voltage for reverse with change in polarity. All that is working when I use MDI with M18. I have the las...

I tried the tool change on MDI T0101 ETC. with no movement of the turret. I reloaded the program and all the files from the zip but still the same problem no movement from the turret only in the turret index on the VCP. At this point I have ran out of ideas. JOHN report_0CB2B7D433C8-0701203466_2020-...

Thanks for the reply I will try it tomorrow. I thinks that should fix because I was using t202 etc. thanks again.

John

Well everything seems to work with the exception of MDI tool change command. It will index to home with the MDI M18 Command and the index button on the control panel will advance the changer forward one position.
Any ideas what I am doing incorrectly?

John