Search found 10 matches
- Fri Apr 20, 2018 1:34 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Acorn Z axis feed rate too slow
- Replies: 1
- Views: 924
Acorn Z axis feed rate too slow
Been using the Acorn with clearpath servos all working well, the only issue I have is that I can't get the Z axis to rapid move. In the wizard the maximum speed seems set to 150, is this correct? I am engraving 800 parts and the z axis speed is slowing the cycle down. Can the Z axis speed be increas...
- Fri Jan 05, 2018 1:36 pm
- Forum: Centroid Acorn CNC Controller
- Topic: ACORN STEP & DIRECTION (resolved)
- Replies: 7
- Views: 2202
Re: ACORN STEP & DIRECTION
Fixed the problem. I removed all the wiring and rewired it. I missed something but don't know what.
Thanks
Thanks
- Thu Jan 04, 2018 3:04 pm
- Forum: Centroid Acorn CNC Controller
- Topic: ACORN STEP & DIRECTION (resolved)
- Replies: 7
- Views: 2202
Re: ACORN STEP & DIRECTION
I bought the molex ended cable from teknic. I cut off the molex because there is no stock in the uk for a matching plug. all the colours are the same.
Very strange. I also tried a stepper driver and I had to swap them around to. But it does work. Just happy that I have had to swap the wires.
Very strange. I also tried a stepper driver and I had to swap them around to. But it does work. Just happy that I have had to swap the wires.
- Thu Jan 04, 2018 2:16 pm
- Forum: Centroid Acorn CNC Controller
- Topic: ACORN STEP & DIRECTION (resolved)
- Replies: 7
- Views: 2202
Re: ACORN STEP & DIRECTION
I did follow the schematic in the first place but I could not get it to work.
- Thu Jan 04, 2018 1:54 pm
- Forum: Centroid Acorn CNC Controller
- Topic: ACORN STEP & DIRECTION (resolved)
- Replies: 7
- Views: 2202
Re: ACORN STEP & DIRECTION
Thanks. The first axis on the acorn H2 connector has the step & direction outputs to the servo drive. on the clearpath it shows that the step input is on black wire labelled input B+ and the B- it shows as yellow.A video on youtube link here https://www.youtube.com/watch?v=CVuNCYhxudI&t=6s S...
- Thu Jan 04, 2018 11:31 am
- Forum: Centroid Acorn CNC Controller
- Topic: ACORN STEP & DIRECTION (resolved)
- Replies: 7
- Views: 2202
ACORN STEP & DIRECTION (resolved)
Running an Acorn but to get the steppers or clearpath to work I have to swap out the step wires. I mean yellow going to step only works when common is connected to step and the step wire connected to ground. Looking at a video online he has his working the correct way round.
Any idea's Thanks.
Any idea's Thanks.
- Tue Dec 26, 2017 5:22 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: YASKAWA Drive CPCR-01-SD1B
- Replies: 0
- Views: 1513
YASKAWA Drive CPCR-01-SD1B
Does anyone have information on the pinouts on the CN1 connection of a Yaskawa CPCR-01-SD1B?
- Tue Dec 26, 2017 5:18 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Win 7 vs Win 10
- Replies: 8
- Views: 3625
Re: Win 7 vs Win 10
Does the cnc software run on 64 bit pc. On all the specs I see no mention of 32 or 64 bit
Thanks
Thanks
- Sun Dec 17, 2017 10:23 am
- Forum: Centroid Acorn CNC Controller
- Topic: Acorn 9031 drive fault New installation (resolved, wire like schematic shows)
- Replies: 3
- Views: 1410
Re: Acorn 9031 drive fault New installation
Fixed in5 not connected
- Sun Dec 17, 2017 9:37 am
- Forum: Centroid Acorn CNC Controller
- Topic: Acorn 9031 drive fault New installation (resolved, wire like schematic shows)
- Replies: 3
- Views: 1410
Acorn 9031 drive fault New installation (resolved, wire like schematic shows)
Acorn coming up with 9031 drive fault even if set to bench test. Any idea's?
Thanks
Thanks