Search found 35 matches

by RandyL
Sun Jan 27, 2019 10:34 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Help with Allin1dc CNC11 to CNC12 upgrade
Replies: 14
Views: 6796

Re: Help with Allin1dc CNC11 to CNC12 upgrade

Got the Hunyang vfd drive installed. Machine spindle is running again. couple of odd things noticed and not sure why: 1, My air operated brake does not release now with S command, stays locked. Not sure why it is not releasing. I removed air pressure for now. 2, The vcp wont let me change incrementa...
by RandyL
Sat Jan 26, 2019 7:42 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Help with Allin1dc CNC11 to CNC12 upgrade
Replies: 14
Views: 6796

Re: Help with Allin1dc CNC11 to CNC12 upgrade

I opened up my cabinet, TECO VFD has no display, quick check of power in = 240V. cycled power, no display. looks like VFD failed, I have inline breaker but they were not tripped. Not sure what happened as spindle was running fine before I switched to cnc12 this morning... I have a new spare 5hp rate...
by RandyL
Sat Jan 26, 2019 5:32 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Help with Allin1dc CNC11 to CNC12 upgrade
Replies: 14
Views: 6796

Re: Help with Allin1dc CNC11 to CNC12 upgrade

Having similar issue. just upgraded to cnc 12 from 11, allin1 system. After I edited parameters page and on #219 Virtual Control Panel Options change the number from a zero to a 1. the VCP applied to touch screen and looked correct. Tested, x / y and z, all controlled correctly from what i can see. ...
by RandyL
Fri Apr 20, 2018 12:13 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Allin1 new install, spindle speed VFD scaling rpm.
Replies: 7
Views: 4061

Re: Allin1 new install, spindle speed VFD scaling rpm.

Thanks tblough, Good information for all on this forum. I have the motor setup parameters set to 60hz I have the parameters for high and low hz set 100hz / 10hz. I don't have a tach but running at near 100hz it's really spinning the spindle i would guess 3000plus rpm. At 10hz load its probably ~150 ...
by RandyL
Thu Apr 19, 2018 8:40 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Allin1 new install, spindle speed VFD scaling rpm.
Replies: 7
Views: 4061

Re: Allin1 new install, spindle speed VFD scaling rpm.

tblough and marty are on the right track for what I need to accomplish.
? to marty's post, my motor is a standard 2hp BP motor rated at 60hz. Am i correct in setting the vfd max frequency to 120hz?
Just don't want to cook my spindle motor.

I am using a Teco 7300 vfd
Thanks
RL
by RandyL
Thu Apr 19, 2018 12:08 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Allin1 new install, spindle speed VFD scaling rpm.
Replies: 7
Views: 4061

Allin1 new install, spindle speed VFD scaling rpm.

VFD is working and connected to BP 2hp motor. Problem: when i m3 s500 motor will run slow estimated 150 rpm or less. s750 spindle will run a bit faster, s2000 spindle is running fast. I have the max spindle speed set at 2000. If i set max spindle to 1000, then s1000 is max speed.How do i scale the r...
by RandyL
Thu Apr 05, 2018 10:19 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Mist allin1 new install how to?
Replies: 1
Views: 1630

Mist allin1 new install how to?

Allin1 new install report_0831171817_2018-04-04_21-13-00.zip having problems getting the mist to work. from the PC screen alt j CTRL + K does not seem to do anything. From MDI mode M07 = i can hear the solenoid activate in the mist cabinet, but i am not getting any air through the line. I may have a...
by RandyL
Mon Apr 02, 2018 6:27 pm
Forum: Centroid Acorn CNC Controller
Topic: x-keys alternative ElGato Stream Deck
Replies: 6
Views: 3044

Re: x-keys alternative ElGato Stream Deck

Is the new software update apply to allin1 or is it just for acorn?
I hear there is supposed to be a virtual control panel for the allin1. My touchscreen should work good with it.
I have MPU11.
by RandyL
Mon Apr 02, 2018 4:31 pm
Forum: Centroid Acorn CNC Controller
Topic: x-keys alternative ElGato Stream Deck
Replies: 6
Views: 3044

Re: x-keys alternative ElGato Stream Deck

very cool, at $141 dollars you might want to wait for the centroid wireless mpg pendant , soon to be released... its target price is $195 and can do alot more than the cool Stream Deck unit. Are these units available? I need an MPG for my new allin1 system. Does the $195 target price cover all cost...