i edited your dxf and changed three of the poly arcs with real arcs
Search found 7419 matches
- Tue May 14, 2024 7:48 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Dxf
- Replies: 71
- Views: 38866
- Tue May 14, 2024 7:43 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Dxf
- Replies: 71
- Views: 38866
Re: Dxf
Why do you want to import dxf if you have the model in fusion? Postprocessor for Centroid in fusion is very good. Uwe Mon but est d'utiliser un maximum intercom C'est tellement simple d'utilisation Imaginons que ma poche est trop petite En deux temps trois mouvements j'ai modifié mes cotations Et s...
- Tue May 14, 2024 6:43 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: CNC12 Router Restructure Beta Software thread.
- Replies: 1
- Views: 8
Re: CNC12 Router Restructure Beta Software thread.
and we will add a similar rectangular box for the work envelope in addition to being able to show the machine travel limits.
- Tue May 14, 2024 6:41 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: CNC12 Router Restructure Beta Software thread.
- Replies: 1
- Views: 8
CNC12 Router Restructure Beta Software thread.
We've been working on tailoring CNC12 Router to better fit a typical CNC Router Operators work flow. This 'remodel' of CNC12 Router will be released initially as CNC12 v5.18 for Acorn only. The remodel largely consists of restructuring the CNC12 menus for Router work and adding many new built-in can...
- Tue May 14, 2024 5:30 pm
- Forum: Centroid Hickory CNC Controller
- Topic: Kitamura Mycenter Zero - DELTA Ethercat Retrofit
- Replies: 9
- Views: 850
Re: Kitamura Mycenter Zero - DELTA Ethercat Retrofit
good to hear. They use it in automotive for a reason i suspect. The bad thing is it can't transfer as much torque as an equivalent "normal belt", s you might need a wider one to accommodate for it. Good that mine has room for a 60mm belt. From the quick data i could find, that should be g...
- Tue May 14, 2024 5:28 pm
- Forum: Centroid Hickory CNC Controller
- Topic: Will Hickory ever support third party I/O?
- Replies: 2
- Views: 91
Re: Will Hickory ever support third party I/O?
its possible, but right now we are not working on it. first step would be to identify a couple of good units and get a few in for evaluation to see what is possible. keep in mind third party support for any component adds complexity and support issues (whos fault is it?? ) and we always end up havin...
- Tue May 14, 2024 5:18 pm
- Forum: Centroid Acorn CNC Controller
- Topic: New Build: Denford/Sherline MicroLathe
- Replies: 1
- Views: 59
Re: New Build: Denford/Sherline MicroLathe
nice! thanks for posting a build thread.
we will have the next version of USB BOB support in CNC12 by the end of the week!
we will have the next version of USB BOB support in CNC12 by the end of the week!
- Tue May 14, 2024 5:13 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Axis motion after electronics moved to new enclosure
- Replies: 1
- Views: 33
Re: Axis motion after electronics moved to new enclosure
hello.
any axis motor moving in only one direction is indication of the direction signal not making it to the drive.
since you swapped stepper drives and the issue stayed on that axis, check again the wiring of that axis.
any axis motor moving in only one direction is indication of the direction signal not making it to the drive.
since you swapped stepper drives and the issue stayed on that axis, check again the wiring of that axis.
- Tue May 14, 2024 5:05 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Introduction video to using Notepad ++ and the NCnetic G code editing plugin.
- Replies: 0
- Views: 25
Introduction video to using Notepad ++ and the NCnetic G code editing plugin.
Introduction video to using Notepad ++ and the NCnetic G code editing plugin.
and How to install it with the Centroid CNC PC Tuner.
https://centroidcncforum.com/viewtopic.php?f=61&t=10164
and How to install it with the Centroid CNC PC Tuner.
https://centroidcncforum.com/viewtopic.php?f=61&t=10164
- Tue May 14, 2024 5:00 pm
- Forum: Centroid Acorn CNC Controller
- Topic: File Does Not Have An App Associated With It
- Replies: 12
- Views: 1780