Centroid Community CNC Support Forum

The machine has a Left Y axes and a Right Y axes that are paired. When I push Y- on the VCP, the right and left Y axis moves in the correct direction (Y-) together. When I push Y+ on the VCP, the right axis moves in the correct direction (Y+) but the left moves in the Y- direction. The X and Z axis...

Hi, There is a problem with the 1.30 PC Tuner installing the NCnetic plugin for Notepad++. The PC Tuner only looks for a Notepad++ installation on the C: drive. If Notepad++ is installed on a different drive, the PC Tuner is unable to located the installation. Otherwise the NCnetic plugin is very n...

no. you can use the cad system to break up the poly radius arcs into either 1.) small lines, 2.) real arcs. if you want to use Intercon. otherwise use a CAD/CAM system. i would recommend Vectric Cut 2D for this kind of work, it is similar to Intercon in many regards but, is CAD based and will accept...

i edited your dxf and changed three of the poly arcs with real arcs

Why do you want to import dxf if you have the model in fusion? Postprocessor for Centroid in fusion is very good. Uwe Mon but est d'utiliser un maximum intercom C'est tellement simple d'utilisation Imaginons que ma poche est trop petite En deux temps trois mouvements j'ai modifié mes cotations Et s...

and we will add a similar rectangular box for the work envelope in addition to being able to show the machine travel limits.

We've been working on tailoring CNC12 Router to better fit a typical CNC Router Operators work flow. This 'remodel' of CNC12 Router will be released initially as CNC12 v5.18 for Acorn only. The remodel largely consists of restructuring the CNC12 menus for Router work and adding many new built-in can...

good to hear. They use it in automotive for a reason i suspect. The bad thing is it can't transfer as much torque as an equivalent "normal belt", s you might need a wider one to accommodate for it. Good that mine has room for a 60mm belt. From the quick data i could find, that should be g...

its possible, but right now we are not working on it. first step would be to identify a couple of good units and get a few in for evaluation to see what is possible. keep in mind third party support for any component adds complexity and support issues (whos fault is it?? ) and we always end up havin...

nice! thanks for posting a build thread.
we will have the next version of USB BOB support in CNC12 by the end of the week!