Centroid Community CNC Support Forum

It's an old thread, but the information is still correct. On the thread details screen (F7) the "thread angle" setting controls how much of the cut is on the flank of the tool. Entering 60° will cut with the tip (evenly on both flanks). I usually use 55°, or 65° depending on which way I wa...

https://shopcentroidcnc.com/shop/cnc-so ... e-license/?

There's probably no need to run 100 lines of parameter checking code at every tool change. Normally, once you have your tool setter and probe set up, you never change that again.

You can use any tool to set your WCS Z0 as long as you ALSO have that tool's height offset active as well. If you just load the tool and not the offset, or you don't load the tool at all, then your part offset will be wrong.

Pro has same CSR as ultimate. Ultimate adds scale feedback, unlimited digitizing, and lathe C axis,.

Double post - https://centroidcncforum.com/viewtopic. ... 319#p86319

You can select the direction for the measurement points, but the rotation symbol will always appear on the X DRO.

Section 4.4 in the Mill Operator's Manual.

If you are already doing manual tool changes, post each tool path as a separate file. Then, just do the tool change before running the file.

Distance to go shows that amount of movement remaining in the current G-code line. It does not show the amount of material to be removed from the part.