Search found 3106 matches
- Thu May 02, 2024 2:41 pm
- Forum: Centroid Acorn CNC Controller
- Topic: CSR on acorn 5.1
- Replies: 2
- Views: 54
Re: CSR on acorn 5.1
You can select the direction for the measurement points, but the rotation symbol will always appear on the X DRO.
- Thu May 02, 2024 1:57 pm
- Forum: Centroid Acorn CNC Controller
- Topic: CSR on acorn 5.1
- Replies: 2
- Views: 54
Re: CSR on acorn 5.1
Section 4.4 in the Mill Operator's Manual.
- Wed May 01, 2024 5:09 pm
- Forum: Centroid Acorn CNC Controller
- Topic: New Build LMS 3990 Hi Torque Mini Mill
- Replies: 49
- Views: 4562
Re: New Build LMS 3990 Hi Torque Mini Mill
If you are already doing manual tool changes, post each tool path as a separate file. Then, just do the tool change before running the file.
- Mon Apr 29, 2024 11:38 am
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: V5.1 Lathe distance to go isn't working <misunderstanding>
- Replies: 6
- Views: 216
Re: V5.1 Lathe distance to go isn't working
Distance to go shows that amount of movement remaining in the current G-code line. It does not show the amount of material to be removed from the part.
- Fri Apr 26, 2024 4:06 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Issue with outside frame milling
- Replies: 12
- Views: 267
Re: Issue with outside frame milling
Do you have cutter comp turned on in the wrong direction? Posting your Intercon file would let us see.
- Thu Apr 25, 2024 4:51 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Enable outputs on Acorn
- Replies: 9
- Views: 290
Re: Enable outputs on Acorn
If you disable drives on an Acorn, you will have to re-home everytime you re-enable the drives. Acorn is an open-loop system.
- Thu Apr 25, 2024 7:06 am
- Forum: Centroid Acorn CNC Controller
- Topic: Remote heartbeat
- Replies: 6
- Views: 247
Re: Remote heartbeat
Some in the past have used fiber optic light guides to reposition the heartbeat.
- Wed Apr 24, 2024 11:19 am
- Forum: Centroid Acorn CNC Controller
- Topic: Homebuilt tool touchoff block(resolved)
- Replies: 5
- Views: 242
Re: Homebuilt tool touchoff block
Are you sure your tool is grounded through the spindle? If you have ceramic bearings, you'll need a separate ground wire with an alligator clip for your tool.
- Tue Apr 23, 2024 12:48 pm
- Forum: Centroid Acorn CNC Controller
- Topic: why is my origin inverted? <resolved>
- Replies: 6
- Views: 162
Re: why is my origin inverted?
Most likely your machine axis are setup incorrectly. On a mill, X+ is the SPINDLE moving towards the right. Y+ is the SPINDLE moving towards the column, and Z+ is the SPINDLE moving up. The mistake people commonly make is even though the spindle doesn't actually move in X and Y, the axis are set up ...
- Sun Apr 21, 2024 1:18 pm
- Forum: Centroid Hickory CNC Controller
- Topic: Hardinge CHNC II+ Hickory LeadShine EL7 Retrofit
- Replies: 97
- Views: 10232
Re: Hardinge CHNC II+ Hickory LeadShine EL7 Retrofit
You may find that you will always need a test cut. There is no way the probe can account for tool deflection and cutting forces.