Search found 31 matches

by SEK22Hornet
Sat Mar 31, 2018 5:55 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC10 Servo3IO spindle not turning on
Replies: 1
Views: 1160

CNC10 Servo3IO spindle not turning on

Ok - a little background - When i bought his machine a few years ago, it had a problem where once in a while the spindle would just shut down mid program. The Direction control output from the Servo3IO board and the analog speed control voltage would just drop out - no errors - the drives would keep...
by SEK22Hornet
Fri Oct 27, 2017 2:45 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: mist coolant connections
Replies: 2
Views: 1239

mist coolant connections

Looking at adding a mist coolant setup to my mill using the SERVO3IO board. Having trouble finding information on the connections. I have no information on the board - can someone help me locate the connection points? Also, do I need an external relay or is the a relay on the board that will handle ...
by SEK22Hornet
Sun Oct 09, 2016 12:04 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC10 Version 2.72 error 436
Replies: 9
Views: 2917

Re: CNC10 Version 2.72 error 436

Ran my mill for about an hour and half this evening. No error messages. Looks like adjusting the setting has taken care of the issue - thanks for the help!
by SEK22Hornet
Tue Oct 04, 2016 7:56 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC10 Version 2.72 error 436
Replies: 9
Views: 2917

Re: CNC10 Version 2.72 error 436

Checked the voltage at the drive - 116.6 no load and the lowest I saw it dip while dry running a program was about 113 - hard to see with a digital meter. I set the max jog rates to 275 on both x and y axis - z was set to 215 so I left it alone for now. When I saved the change, the software told me ...
by SEK22Hornet
Mon Oct 03, 2016 10:15 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC10 Version 2.72 error 436
Replies: 9
Views: 2917

Re: CNC10 Version 2.72 error 436

Here is the report.zip. I hope to have some time to do more troubleshooting later in the week and hopefully I'll get the voltage measurements for you. I'm a trained electronics technician with over 35 years of experience so I'm pretty comfortable with that side of things.
by SEK22Hornet
Mon Oct 03, 2016 12:17 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC10 Version 2.72 error 436
Replies: 9
Views: 2917

Re: CNC10 Version 2.72 error 436

I'll post the report.zip when I get home - The voltage on the output of the power supply measures 118 volts DC. I have not checked it while running the motors. I'll have to look and see where to set the max rates and accels....(I'm guessing they are in the Config screen).
by SEK22Hornet
Sun Oct 02, 2016 8:43 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC10 Version 2.72 error 436
Replies: 9
Views: 2917

Re: CNC10 Version 2.72 error 436

Please email a current report to tech@ajaxcnc.com. It could be that the arcing may have damaged something internally on the drive which is causing your 436 Servo Drive Shutdown messages. I have had a problem writing the report to the USB stick I usually use - the machine reads the NC files off of i...
by SEK22Hornet
Sun Sep 25, 2016 7:40 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC10 Version 2.72 error 436
Replies: 9
Views: 2917

CNC10 Version 2.72 error 436

I was having some motherboard problems and had the electrical box on DM45NC open when I powered things up, I saw and heard arcing. On further investigation, I found that the source was the positive terminal of the cap on the DC power supply for the servos. After digging the assembly out, I was able ...
by SEK22Hornet
Sun Aug 07, 2016 10:07 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Post Processor for Autodesk Fusion 360
Replies: 7
Views: 3306

Re: Post Processor for Autodesk Fusion 360

I've been using Fusion360 for my Ajax DM45NC mill lately. I ended up using the generic Fanuc post processor.

Dan
by SEK22Hornet
Wed Oct 21, 2015 10:44 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Problems upgrading from CNC10 v1.02 to 2.72
Replies: 7
Views: 4734

Re: Problems upgrading from CNC10 v1.02 to 2.72

Thank you very much! I have been making up a notebook on this machine as I go, so I'll print that out and add it to the notebook. I will also go ahead and run it when I have a chance to see what mine looks like, just to make sure. I really didn't have time to do a thorough check the other night.