Search found 31 matches
- Sat Mar 31, 2018 5:55 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CNC10 Servo3IO spindle not turning on
- Replies: 1
- Views: 1174
CNC10 Servo3IO spindle not turning on
Ok - a little background - When i bought his machine a few years ago, it had a problem where once in a while the spindle would just shut down mid program. The Direction control output from the Servo3IO board and the analog speed control voltage would just drop out - no errors - the drives would keep...
- Fri Oct 27, 2017 2:45 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: mist coolant connections
- Replies: 2
- Views: 1299
mist coolant connections
Looking at adding a mist coolant setup to my mill using the SERVO3IO board. Having trouble finding information on the connections. I have no information on the board - can someone help me locate the connection points? Also, do I need an external relay or is the a relay on the board that will handle ...
- Sun Oct 09, 2016 12:04 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CNC10 Version 2.72 error 436
- Replies: 9
- Views: 2981
Re: CNC10 Version 2.72 error 436
Ran my mill for about an hour and half this evening. No error messages. Looks like adjusting the setting has taken care of the issue - thanks for the help!
- Tue Oct 04, 2016 7:56 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CNC10 Version 2.72 error 436
- Replies: 9
- Views: 2981
Re: CNC10 Version 2.72 error 436
Checked the voltage at the drive - 116.6 no load and the lowest I saw it dip while dry running a program was about 113 - hard to see with a digital meter. I set the max jog rates to 275 on both x and y axis - z was set to 215 so I left it alone for now. When I saved the change, the software told me ...
- Mon Oct 03, 2016 10:15 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CNC10 Version 2.72 error 436
- Replies: 9
- Views: 2981
Re: CNC10 Version 2.72 error 436
Here is the report.zip. I hope to have some time to do more troubleshooting later in the week and hopefully I'll get the voltage measurements for you. I'm a trained electronics technician with over 35 years of experience so I'm pretty comfortable with that side of things.
- Mon Oct 03, 2016 12:17 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CNC10 Version 2.72 error 436
- Replies: 9
- Views: 2981
Re: CNC10 Version 2.72 error 436
I'll post the report.zip when I get home - The voltage on the output of the power supply measures 118 volts DC. I have not checked it while running the motors. I'll have to look and see where to set the max rates and accels....(I'm guessing they are in the Config screen).
- Sun Oct 02, 2016 8:43 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CNC10 Version 2.72 error 436
- Replies: 9
- Views: 2981
Re: CNC10 Version 2.72 error 436
Please email a current report to tech@ajaxcnc.com. It could be that the arcing may have damaged something internally on the drive which is causing your 436 Servo Drive Shutdown messages. I have had a problem writing the report to the USB stick I usually use - the machine reads the NC files off of i...
- Sun Sep 25, 2016 7:40 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CNC10 Version 2.72 error 436
- Replies: 9
- Views: 2981
CNC10 Version 2.72 error 436
I was having some motherboard problems and had the electrical box on DM45NC open when I powered things up, I saw and heard arcing. On further investigation, I found that the source was the positive terminal of the cap on the DC power supply for the servos. After digging the assembly out, I was able ...
- Sun Aug 07, 2016 10:07 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Post Processor for Autodesk Fusion 360
- Replies: 7
- Views: 3337
Re: Post Processor for Autodesk Fusion 360
I've been using Fusion360 for my Ajax DM45NC mill lately. I ended up using the generic Fanuc post processor.
Dan
Dan
- Wed Oct 21, 2015 10:44 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Problems upgrading from CNC10 v1.02 to 2.72
- Replies: 7
- Views: 4765
Re: Problems upgrading from CNC10 v1.02 to 2.72
Thank you very much! I have been making up a notebook on this machine as I go, so I'll print that out and add it to the notebook. I will also go ahead and run it when I have a chance to see what mine looks like, just to make sure. I really didn't have time to do a thorough check the other night.