Hello !
Im Just doing the last finishing touches on my mazak lathe retrofit with oak board and i ran a small program to test the machine .
All looks great but the run time graphics come up as they should but its not showing the Trail , i tried F9 on and off but no change !!
Any ideas anyone ?
Thanks
Search found 14 matches
- Tue Dec 19, 2017 6:17 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Run Time Graphics
- Replies: 2
- Views: 2083
- Mon Dec 04, 2017 7:05 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: How to program AUX keys to operate outputs
- Replies: 3
- Views: 1655
Re: How to program AUX keys to operate outputs
Done !!!!
Thanks . That was very helpful
Thanks . That was very helpful
- Thu Nov 30, 2017 5:24 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: How to program AUX keys to operate outputs
- Replies: 3
- Views: 1655
How to program AUX keys to operate outputs
Hello
How can i program Aux keys to operate outputs for example Aux 1 to move tail stock foreword and Aux 2 to move it backwards
Thanks
How can i program Aux keys to operate outputs for example Aux 1 to move tail stock foreword and Aux 2 to move it backwards
Thanks
- Mon Sep 12, 2016 3:11 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Encoder problem
- Replies: 3
- Views: 1771
Re: Encoder problem
i checked the cables all seems good but im not finding the 5v out from the drives
- Tue Sep 06, 2016 9:37 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Encoder problem
- Replies: 3
- Views: 1771
Encoder problem
Hi i am currently doing a fanuc retrofit with the oak board and ran in a problem when i start up the LED on the oak its showing error 4 and on the the screen its showing a message 412 x axis(1) encoder biss offline for all 3 axis and in the pid the encoder abs position its not updating. i checked th...
- Tue Jun 17, 2014 11:21 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: system test problem
- Replies: 1
- Views: 1516
system test problem
Hi again The machine is completely installed and we are running the system test but its failing with an alarm "Spindle Encocoder not detected " In this system we have a spindle encoder but it is being used only for the ATC and it is not connected to the MPU11 its connected to the inverter....
- Tue Jun 03, 2014 9:38 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Finding out how the ATC work
- Replies: 1
- Views: 1550
Finding out how the ATC work
We want to start using the ATC. When the ATC is under the spindle the Z-axis should move down onto the tool. We are trying to find from where to set this distance. We checked the program and found references to stg25. We could not find this label in program. Where can we find the associate file whic...
- Wed May 28, 2014 7:16 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Z axis brake
- Replies: 3
- Views: 2639
Re: Z axis brake
HI .
Thanks again for your help !! Problem solved , Well done .
Thanks again for your help !! Problem solved , Well done .
- Tue May 27, 2014 8:29 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Z axis brake
- Replies: 3
- Views: 2639
Z axis brake
We have a problem where to connect the brake. We did find an output on the GIO4D labelled brake on the third axis however it does not activate on and off. We tested the enable and it did not activate also. The inputs where wired according the manual. We are thinking that these outputs are not active...
- Mon May 26, 2014 3:06 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: ACDC Fanuc retrofit encoders
- Replies: 7
- Views: 3623
Re: ACDC Fanuc retrofit encoders
Problem solved !!
THanks it was the wired input
THanks it was the wired input