Search found 7 matches

by billb95
Fri Jan 23, 2015 5:13 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Cmos Battery dead
Replies: 3
Views: 3149

Re: Cmos Battery dead

Has anyone had success using the DS1287 chip?
by billb95
Tue Jan 20, 2015 12:44 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Cmos Battery dead
Replies: 3
Views: 3149

Re: Cmos Battery dead

1) I removed the chip and fitted a 24 pin IC socket. 2) I got a DS1287 chip through ebay fitted it to the socket and booted up the machine. 3) The system booted up and I set the cmos as per instructions from the tech info. 4) When re booted the settings were lost. I assumed the new chip is not worki...
by billb95
Mon Jan 12, 2015 4:37 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Cmos Battery dead
Replies: 3
Views: 3149

Cmos Battery dead

I have a CPU7 and my Cmos battery has died, when I looked to change it I found it is a chip rather than the standard coin battery.

The motherboard looks to be the Acrosser ARB-1564.

Is there a procedure for this problem?
by billb95
Tue Feb 11, 2014 4:25 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Keyboard bounce
Replies: 4
Views: 2506

Re: Keyboard bounce

Setting the "Typematic rate delay" to slow has improved the situation but I still have the problem.

Could it be the keyboard membrane and if so, what would be the cost of a new one ?

Thanks Bill.
by billb95
Sat Jan 11, 2014 4:32 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Keyboard bounce
Replies: 4
Views: 2506

Re: Keyboard bounce

Liviu,
they are Tryax machines and the serial numbers are:-

M400 - 6570

T400- 2055

Scott,

The BIOS setting for "Typematic rate delay" was set fast so I have changed it to slow.

I will see what difference that makes next week and post back.

Thanks Bill.
by billb95
Thu Jan 09, 2014 4:52 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Keyboard bounce
Replies: 4
Views: 2506

Keyboard bounce

I have two CNC7 controls, one lathe and one mill.
Both keypads suffer from an annoying "key bounce", can this be adjusted?

Thanks
by billb95
Sun Mar 17, 2013 8:12 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: MPU11 and GPIO4D PARTS
Replies: 3
Views: 3291

Re: MPU11 and GPIO4D PARTS

Did you have any luck finding the type/part number as I need a spare plug for my setup?