Centroid Community CNC Support Forum

Did you try it in another USB port? Is there another computer you can test it on?

If you switch it to G-Code does that display? Please attach a report.

It looks like its in Feed Hold. What happens if you press Cycle Start?

Can you please email me at diysales@centroidcnc.com. I can see what Acorn you have an let you know what options there are depending on the warranty state of the Acorn.

Uwe is correct. For further context: All Centroid controls have their internal network interface set to Auto Negotiate. This is the standard with all modern Network Interface Devices. All NICs in PCs will be by default set to Auto Negotiate for the same reason. Unfortunately, in small sample of PC N...

I see you have already gone through some of the troubleshooting steps but please go though TB 270 in its entirety eliminate all potential issues.

https://www.centroidcnc.com/dealersuppo ... ds/270.pdf

The 2nd PC is for the other currently working Acorn (it is verified to otherwise work with a control)?

10.168.41.2 is the board side (Acorn in this case). If it can't be reached you won't be able to get any further with software booting. Can you check and verify that the Acorn is powered up with a heartbeat?

All the Leadshine models that Centroid carries are the high inertia model. The medium inertia are not well suited for most CNC operations. The model number for the 850w 130mm motor we carry is ELM2H-0850LD130F-H. You can find the dimensional specs in the below document: https://shopcentroidcnc.com/w...

What are the Yaskawa drive model numbers? The drives themselves probably support a number of other command signals.