Centroid Community CNC Support Forum

Try deleting the license.dat in the CNCT directory. Then copy the License back down to the PC from the email and loading it again. Just in case anything got corrupted.

The serial number and the license match (the hardware and the License were sent out at the same time). We are looking into it further to see what the issue could be.

Licenses were not purchased through us, but via a re-seller. This was resolved when the re-seller eventually purchased the licenses from us.

CNC12 has not been tested in Tablet mode. It sounds very much like a Windows, as in tablet mode it tries to only show one "app" at a time and is getting confused with the VCP. There might be workarounds but running in tablet mode is not currently something supported.

The Centroid Software only takes up around 100mb, but Windows itself takes up about 24GB and is growing with every update. SSDs also need some free space to work at optimal performance. So 128GB would probably be the minimum, but as stated above, the cost is so low for 256GBs it doesn't make sense f...

Hello Steve, Please send me an email at diysales@centroidcnc.com . We are operating with a limited staff and we apologize if we made a mistake on an order, but if that is the case we will make it right. We are working mostly remotely, but 814-353-9290 ext 117 should be also still be working (that is...

Connect one of the Acorns directly to the PC via Ethernet, to eliminate the Switch from the equation and check the IP address as Marty suggest. I would also disable the Anti-Virus to make sure an update to it didn't flag the Centroid Software of the network connection to the Acorn as a problem with ...

I'm trying a NUC8i3BEH that I bought for a customer for another purpose. He doesn't need it until after New Years, so I'm trying in on one of my Acorn test benches. I've placed the NUC in various positions near various components and have had no problem with electrical noise. Granted, an open test ...

NUCs are a great option. Lots of power in a little package.

Once captured, the PLC sends realtime data via ModBus to my HMI (Human Machine Interface) which is just a wireless Android Tablet. The tablet display the status of all signals as well as letting me turn things on and off remotely. TeamViewer should be able to do the same thing for Centroid. I don't...