Centroid Community CNC Support Forum

1) Why is the PLC diagnostic window showing the Alarm state as red, regardless of whether the driver is set to NO or NC output? It seems that when the driver is set to NC, Acorn thinks there's no alarm, but it's still showing as being an open circuit (red) in the PLC Diagnostic window. green is act...

Edingcnc have no radius compensation for mill.

and since Mr. Eding sold his products and his company, the software has gone downhill.

I hope the new tool table is in one window and not in 2 and therefore not 2 files. In principle it would be enough for me. And could automatic capitalization be deactivated? I generally always have uppercase letters on the PC because of Cam and then in cnc12 it is lowercase

For me, Z Reference would be Tool 0 (empty spindle). Every measured tool is a positive value that can also be remeasured. Compatible with external tool setters. Values ​​of D and H from the active tool on the main page during program run would be fantastic.

thanks

[media] [/media]

Added to the Wizard Touch Probe setup menu the ability to enable/disabled the new Probe Protection feature based on Tool number

How would that work for the oak since no wizard is possible. Is the entry in the parameters enough?

I had this jerky smothing with an active switching of the 3D measuring probe without an error message from the system, I haven't tested this update yet.

I could have easily done it, but I wanted an automatic process. If the machine stands still for a longer period of time (can be freely defined), the spindle needs to be warmed up again. So I don't have to think about doing it. If the spindle is in regular operation through a program, the time until ...