Centroid Community CNC Support Forum

Centroid_Liviu wrote: ↑Mon Apr 29, 2024 8:22 am Can you please email me at diysales@centroidcnc.com. I can see what Acorn you have an let you know what options there are depending on the warranty state of the Acorn.

Will do. Thanks for your help!

Sorry ShawnM, I guess my original post wasn't completely clear. It did get to the point were I was unable to reconnect. I have gone back through and used the PC tuner, and worked through Tech Bulletin 270. I downloaded all windows updates and verified that the firewall is still off. I am getting th...

Centroid_Liviu wrote: ↑Wed Apr 24, 2024 3:26 pm The 2nd PC is for the other currently working Acorn (it is verified to otherwise work with a control)?

Yes, I tried the one from my lathe and got the same issue.

Also, I have tried a second shielded Ethernet cable from my other working Acron machine without luck.

10.168.41.2 is the board side (Acorn in this case). If it can't be reached you won't be able to get any further with software booting. Can you check and verify that the Acorn is powered up with a heartbeat? I do have the Acorn powered up, and have the flashing heartbeat indicator. I also tried a se...

I’m not sure how to add the report.zip file if I can’t connect to Acorn to create the file. I can’t check for com issues if I can’t connected to Acorn. The only thing I was able to check was the ping test. My bad, you stated a reboot fixed it so I was thinking you were able to connect again. I'd tr...

I’m not sure how to add the report.zip file if I can’t connect to Acorn to create the file. I can’t check for com issues if I can’t connected to Acorn. The only thing I was able to check was the ping test.

Hello everyone, I need a little help with my Acorn. Today, I was running a job when the machine just stopped halfway through the program. It's happened a few times in the past few days, but a reboot has fixed it. When it stops, CNC12 is unresponsive, and I have to close it and reboot the computer an...

Well, the signal isolator did not solve my problem. I'm not sure what else to try. If anyone has another idea, please let me know.
Thanks

I ordered one from eBay. Fingers crossed!