Centroid Community CNC Support Forum

Seeing that the yaskawa sgd7s drives are supported, does this mean the sgdv drives with the eathercat option module OCA01A would also be supported. Also where would I find the hickory quick start quite.
Thanks

Have been running my mpu11/dc3iob mill with TT1 hooked to input 13 working fine. I added dp4 probe and software. dp4 is hooked up to input 14 on dc3iob. Now TT1 does not work the same, when i try to set a tool height with F3 Set automatic x and y move ok (par 17) but then z moves in "+" di...

I have been running my mill for over a year now with mpu11 and centroid software. Now I am ready for phase 2, changing dc drives to ac drives using Yaskawa Sigma 5 and Optic Direct. My question is, is there any TB's or any information on this setup yet. Also what sigma 5 sgdv servo drives work with ...

I had this same problem during testing and after setup, and every time i turn my machine on i still have this problem. Like you i loaded my software a bunch of times, changed computers, checked my wiring. Then i got so mad i kept turning my machine on and off. Then i found out it takes about 2 to 5 ...

I have the exact same problem with my cnc11 for a mill. It takes me at least 5 times shutting ever thing down then back up to power up right. It was tough in the beginning before I knew I had to turn it off and on so many times, I must have changed wiring and reloaded software 100 times. So I would ...

Scott, Thanks for the reply. One more question on this subject, using a three axis mill w/rotory tilt table for 5axis how much faster/better would a system using CNC10 board and sd3/sd1 w/ 1kw ac servos be compaired to a system using mpu11 board and DC1 w/ 29inlb (or 40inlb) dc servos on the same ma...

Is the mpu11 compatable with Centroids "SD" ac Drives. The mpu11 seems to have only 6 fiber optics while the cpu10 board uses 7. Also does the cnc11 software work with the "SD" drives. The demo copy i have does not have an ac drive menu to set up ac drives,(CNC9.hex file). Thanks...