Seeing that the yaskawa sgd7s drives are supported, does this mean the sgdv drives with the eathercat option module OCA01A would also be supported. Also where would I find the hickory quick start quite.
Thanks
Search found 7 matches
- Thu Jun 29, 2023 6:47 pm
- Forum: Centroid Hickory CNC Controller
- Topic: The Hickory CNC controller is now available.
- Replies: 33
- Views: 26430
- Wed Sep 25, 2013 8:18 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: tt1 question
- Replies: 0
- Views: 1583
tt1 question
Have been running my mpu11/dc3iob mill with TT1 hooked to input 13 working fine. I added dp4 probe and software. dp4 is hooked up to input 14 on dc3iob. Now TT1 does not work the same, when i try to set a tool height with F3 Set automatic x and y move ok (par 17) but then z moves in "+" di...
- Tue Feb 19, 2013 9:39 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: yaskawa and optic direct
- Replies: 3
- Views: 2525
yaskawa and optic direct
I have been running my mill for over a year now with mpu11 and centroid software. Now I am ready for phase 2, changing dc drives to ac drives using Yaskawa Sigma 5 and Optic Direct. My question is, is there any TB's or any information on this setup yet. Also what sigma 5 sgdv servo drives work with ...
- Sun Aug 14, 2011 5:14 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: ***RESOLVED***9023 Communication out fault (fiber1)
- Replies: 9
- Views: 4939
Re: 9023 Communication out fault (fiber1)
I had this same problem during testing and after setup, and every time i turn my machine on i still have this problem. Like you i loaded my software a bunch of times, changed computers, checked my wiring. Then i got so mad i kept turning my machine on and off. Then i found out it takes about 2 to 5 ...
- Wed Jun 22, 2011 7:40 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: I did so buy a permanent unlock
- Replies: 4
- Views: 3251
Re: I did so buy a permanent unlock
I have the exact same problem with my cnc11 for a mill. It takes me at least 5 times shutting ever thing down then back up to power up right. It was tough in the beginning before I knew I had to turn it off and on so many times, I must have changed wiring and reloaded software 100 times. So I would ...
- Wed Jun 23, 2010 4:30 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: mpu11 and sd drives
- Replies: 2
- Views: 2892
Re: mpu11 and sd drives
Scott, Thanks for the reply. One more question on this subject, using a three axis mill w/rotory tilt table for 5axis how much faster/better would a system using CNC10 board and sd3/sd1 w/ 1kw ac servos be compaired to a system using mpu11 board and DC1 w/ 29inlb (or 40inlb) dc servos on the same ma...
- Tue Jun 22, 2010 7:47 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: mpu11 and sd drives
- Replies: 2
- Views: 2892
mpu11 and sd drives
Is the mpu11 compatable with Centroids "SD" ac Drives. The mpu11 seems to have only 6 fiber optics while the cpu10 board uses 7. Also does the cnc11 software work with the "SD" drives. The demo copy i have does not have an ac drive menu to set up ac drives,(CNC9.hex file). Thanks...