Centroid Community CNC Support Forum

Sorry, forgot it

hi guys, trying to turn some radius i realized, that there a visible steps in the surface. i thought, that the servo drives are not well set up, but i optimized all parameters and servos are runny really smoot now with less than 20counts error ( 1/100mm max deviation ) but steps in the radius are st...

hi guys, today i had a really strange mistake. i did some easy cuts for figure out how to produce better surface in a radius. ( see other thread later ). attached you can find the g-code created 100% in Intercon without any manual modification. i wondered, because the feed while turning was really s...

Hi Uwe, i know that function. But i cannot rename it correctly.

I will have a lot of special threads, so would be great if the XML worms. I will try the next days.

Michael

Hi Uwe, thanks for the hint with the XML, i will have a Look.

How can i run the Finish Pass a second time? Paste and copy?

hi guys, my lathe is running now and i did my first thread: https://youtube.com/shorts/b3qjYhNoy30?feature=share for my Flashlights i want to produce on the lathe i need special threads. in this case M21,5 x 1mm. I learned how to Modify an existing M22 Thread fitting to my requests. But can i save t...

Hi Uwe, thanks for the hint. Right now i am testen Parameters for All Materials and i found out, that with f0,3 i can Break the Chips also in titanium.

Michael

hi Uwe, yes, 200m would be better, but i have often Diameters of 20mm or smaller, so the spindle would be always in Max Speed. So i try to find good parameters with lower Vc. pecking macro for outer roughing is a good idea, but at first i have to get confident with Intercon itself. the last cut is n...

hi Uwe,

thank you. for Aluminium i dont have an issue, 7075 is producing nice short chips with f0,2 and 100vc.

i am more talking about titanium, it is very hard here to get short chips.

hi, i am really new to intercon and i am wondering how can i use pecking for outer contour ?

Thanks
Michael