Centroid Community CNC Support Forum

Yes, you're right, of course 60 degrees. Only if you write 60 in parameter 51 only crap comes out. I had to halve the value so that it looks the way it should.

It's a shame you don't feel like it, thanks anyway

Stephan

Of course its possible The question is whether you would like to make something like that? Because if you feel like doing something like that then it works and it will be finished this year I have something else for you......Have you changed the angle when cutting the G76 thread yet? Do that and cha...

I ask the question whether Uwe can do that? put something like that together Do we need either a macro or an intervention in the system variables? If it were to change the variables it would be time-consuming. Then it would be a job for Centroid. You can read a sample of what something like this can...

Yes, it really works. I'm currently doing this with my MPG by hand. It would be very nice to have this function for turning and milling. Give it a try!!!! Take a bar of long material that would definitely squiggle and chip it down... Then they make the MPG faster and slower about 10%. The whizzing w...

Here is my m51 50 68 88 Macro M50 turns off the C axis. M51 turns on the C axis for me. My servo can be switched between PMW and Step Dir via a pin and that's exactly what my M51 Macro does and the ref drive in C..... For me, m68 starts and m88 stops the driven tool. Uwe has a better ref ride for C ...

And without the M6 ​​just T101 or T1717?
You don't actually do the H19 in the middle of the code.


If that doesn't work, try reinstalling Centroid

Or try it
T1 H1 M6 or T9 H9 M6.
I'm not sure how it worked when milling

Your tool offset does not match the current tool.
Should that be so?

Does T1919 M6 or T101 M6 work?
Then change the post processor.
I see the Centroid changing the tool but not the offset of the tool.
H is not changed.

The idea just came to me!!!!!Thanks to you.
I still have relays available on the card.
M69 M89 activates or deactivates the emergency stop
I can use this to feed a macro.

Danke dir Uwe